Name: D5014D D5014S I.S. SIL3 2/4-Wire HART® Transmitter Power Supply - TR Automatyka
Price: 4264.90 PLN
Availability: InStock

OPIS produktu poz 1 w konfiuratorze

The Repeater Power Supply D5014 module is a high integrity analog input interface suitable for applications requiring SIL 3 level in safety related systems for high risk industries. It provides a fully floating dc supply for energizing conventional 2 wires 4-20 mA, active or passive, transmitters located in Hazardous Area, and repeats the current in floating circuit to drive a Safe Area load. The module supports output current duplication and it allows bi-directional communication signals, for HART® devices.

FEATURES

SIL 3 / SC 3
Input from Zone 0/Div. 1
Installation in Zone 2/Div. 2
2 fully independent channels
4-20 mA Active-Passive Input, Source-Sink Output
Output current duplication available
HART® compatible
Input and Output short circuit proof
In-field programmability by DIP Switch
High Accuracy
Three port isolation, Input/Output/Supply
High Density, two channels per unit

NOWWA za kląłdka nr 1

W zakładce nr 1

Technical Data

Supply
Voltage	24 Vdc nom (18 to 30 Vdc), reverse polarity protected
Current Consumption	90 mA @ 24 Vdc with 20 mA out, typical.
Power Dissipation	1.35 W @ 24 Vdc with 20 mA out, typical.
Input
Type	4 to 20 mA (separately powered input, voltage drop ≤ 0.5 V) or 4 to 20 mA (2 wires Tx current limited ≈ 25 mA), reading range 0 to 24 mA.
Transmitter line voltage	15.0 V typical, 14.5 V minimum, @ 20 mA.
Output
Type	4 to 20 mA, on max. 550 Ω load in source mode (typical 12 V compliance); V min. 8 V @ 0 Ω load V max. 30 V in sink mode, current limited ≈ 25 mA or 1 to 5 V on internal 250 Ω shunt. Output current duplication available (D5014D).
Response time	5 ms (0 to 100 % step change).
Performance
Ref. Conditions	24 V supply, 250 Ω load, 23 ± 1 °C ambient temperature.
Calibration accuracy	≤ ± 0.1 % FSR.
Linearity accuracy	≤ ± 0.05 % FSR.
Temp. influence	≤ ± 0.01 % FSR on zero/span for a 1 °C change.
Isolation
Test Voltage	I.S. In/Out 2.5 kV; I.S. In/Supply 2.5 kV; I.S. In/I.S. In 500 V; Out/Supply 500 V; Out/Out 500 V.
Environmental conditions
Operating temperature	temperature limits –40 to +70 °C.
Storage temperature	temperature limits –45 to +80 °C.
Safety description
Equipment	Associated apparatus and non-sparking electrical equipment.
Safety parameters	Uo = 25.9 V, Io = 92 mA, Po = 594 mW at terminals 7-8, 9-10. Uo = 1.1 V, Io = 56 mA, Po = 16 mW at terminals 8-11, 10-12. Ui = 30 V, Ii = 128 mA, Ci = 0 nF, Li = 0 nH at terminals 8-11, 10-12. Um = 250 Vrms or Vdc, -40 °C ≤ Ta ≤ 70 °C.
Mounting
Type	DIN-Rail 35 mm, with or without Power Bus or on custom Term. Board.
Weight	about 155 g
Connection	by polarized plug-in disconnect screw terminal blocks to accommodate terminations up to 2.5 mm² (13 AWG).
Dimensions	Width 12.5 mm, Depth 123 mm, Height 120 mm.

NOWWA za kląłdka nr 12

co to jest nowy dodaj

Download

co to jest nowy dodaj

drugi plik

Download

qweqwe

D5014D D5014S I.S. SIL3 2/4-Wire HART® Transmitter Power Supply

Technical Data

Supply

Input

Output

Performance

Isolation

Environmental conditions

Safety description

Mounting

FEATURES

NOWWA za kląłdka nr 1

Technical Data

Supply

Input

Output

Performance

Isolation

Environmental conditions

Safety description

Mounting

NOWWA za kląłdka nr 12

co to jest nowy dodaj

drugi plik

Może Cię zainteresuje

Ostatnio oglądane